News Center

What are the reasons for the damage of the transmission valve body?

What are the reasons for the damage of the transmission valve body?

The transmission valve body is located above the transmission oil pan. You can see the valve body after removing the oil pan. Only automatic transmissions have valve bodies; manual transmissions do not. As one of the components in the transmission, the transmission valve body is a hydraulic control unit that converts electronic control into hydraulic pressure, which promotes the shifting of high and low gears in the transmission. The transmission valve body can control the shift mechanism by switching the oil circuits in the valve body.

28

2022

/

03

The transmission valve body needs to be cleaned and inspected regularly.

The transmission valve body needs to be cleaned and inspected regularly.

The valve body is one of the main components of a valve. If the pressure levels are different, there will be different mechanical manufacturing methods. The transmission valve body is the part that controls the shifting between high and low gears in a vehicle's transmission. If the transmission valve body is damaged and needs to be repaired, the transmission needs to be disassembled and the transmission valve body removed. Speaking of the internal mechanical parts of the transmission, it has long been overhauled at the maintenance level.

24

2022

/

03

What are the leakage and maintenance of valve body and bonnet?

What are the leakage and maintenance of valve body and bonnet?

A valve is a control component in a pipeline fluid transportation system, used to change the pipeline cross-section and the direction of the medium flow. It has the functions of guiding, cutting off, throttling, check, diverting, or overflow pressure relief. Therefore, valve leakage is our primary concern regarding valve quality. Today, let's introduce the causes of valve body and bonnet leakage in valve components and their maintenance methods.

21

2022

/

03

What are the common materials for valve bodies?

What are the common materials for valve bodies?

Valve body common material 1: Gray cast iron is a type of cast iron. Carbon exists in the form of flake graphite in cast iron. The fracture is gray. It has good casting and cutting performance and good wear resistance. Used to manufacture frames, boxes, etc.

17

2022

/

03

What is a valve cover?

What is a valve cover?

A valve is a control component in a fluid transport system that has the functions of shut-off, regulation, diversion, backflow prevention, pressure stabilization, diversion, or overflow relief. What is a valve cover?

03

2022

/

03

Several connection methods for gate valve bonnet

Several connection methods for gate valve bonnet

The valve cover and body of the stop valve can be connected by thread, flange, welding and other methods, or by pressure self-sealing device, or the valve cover and body can be made into a whole without connection. The following editor introduces several connection methods.

25

2022

/

02

< 1...101112...17 >